Charm++ parallel programming system

[Xuehan Xu <xxhdx1985126 AT gmail.com>]

Dear sirs:  

I'm confused about the record-replay feature of bigsim emulator recently, I 
used the following command to record the message contents of processor 
2: 

./charmrun +p1 ./jacobi 2 2 2 +x2 +y2 +z2 ++remote-shell ssh +bglog +bgrecordnodes 2

      but when I replay it, the following error occurred: 

[couple@node70 Cjacobi3D]$ ./charmrun +p1 ./jacobi 2 2 2 +x1 +y1 +z1 ++remote-shell ssh +bgreplay 2


Charmrun> started all node programs in 1.178 seconds.
Converse/Charm++ Commit ID: v6.3.0-549-g15fbdcd
Charm++> scheduler running in netpoll mode.
BG info> replay mode for target processor 2.
BG info> Simulating 1x1x1 nodes with 1 comm + 1 work threads each.


BG info> Network type: bluegene.
alpha: 1.000000e-07    packetsize: 1024    CYCLE_TIME_FACTOR:1.000000e-03.
CYCLES_PER_HOP: 5    CYCLES_PER_CORNER: 75.
BG info> cpufactor is 1.000000.
BG info> floating point factor is 0.000000.


BG info> Using WallTimer for timing method. 
BgMessageReplay: PE => 2 NumPes => 8 wth:1
------------- Processor 0 Exiting: Caught Signal ------------
Signal: segmentation violation
Suggestion: Try running with '++debug', or linking with '-memory paranoid' (memory paranoid requires '+netpoll' at runtime).


[0] Stack Traceback:
  [0:0] [0xab7400]
  [0:1]   [0x8275a71]
  [0:2] CcdCallBacks+0x9e  [0x8276032]
  [0:3] CsdScheduleForever+0xc9  [0x8272515]
  [0:4] CsdScheduler+0x11  [0x8272429]
  [0:5]   [0x827094b]


  [0:6] ConverseInit+0x342  [0x8270e5a]
  [0:7] main+0x34  [0x81a0cf0]
  [0:8] __libc_start_main+0xe6  [0x670cc6]
  [0:9]   [0x8135bf1]
Fatal error on PE 0> segmentation violation

    Did I run the emulator correctly? I'm looking forward to your answer, sir:-) Thank you:-)