Charm++ parallel programming system

[Jeff Hammond <jeff.science AT gmail.com>]

I could not reproduce this with the latest git HEAD (c0a12aaee85a0ce05271f9485979db1db4d1d74f).

On the other hand, I could not build with gcc 6.1.0 module.  Switching to gcc 5.3.0 module was required.

Jeff, who is a random person from the internet, not a Charm++ authority

charm++ built successfully.

Next, try out a sample program like gni-crayxc-smp/tests/charm++/simplearrayhello

jhammond@edison11:~/Charm++/git> ./build charm++ gni-crayxc smp -j16  --with-production

jhammond@edison11:~/Charm++/git> module list

Currently Loaded Modulefiles:

  1) modules/3.2.10.4                      10) ugni/6.0-1.0502.10245.9.9.ari         19) PrgEnv-intel/5.2.56

  2) nsg/1.2.0                             11) pmi/5.0.10-1.0000.11050.0.0.ari       20) craype-ivybridge

  3) eswrap/1.1.0-1.020200.1130.0          12) dmapp/7.0.1-1.0502.10246.8.47.ari     21) cray-shmem/7.4.1

  4) switch/1.0-1.0502.57058.1.58.ari      13) gni-headers/4.0-1.0502.10317.9.2.ari  22) cray-mpich/7.4.1

  5) craype-network-aries                  14) xpmem/0.1-2.0502.57015.1.15.ari       23) slurm/edison

  6) craype/2.5.5                          15) dvs/2.5_0.9.0-1.0502.1958.2.55.ari    24) gcc/5.3.0

  7) intel/16.0.2.181                      16) alps/5.2.3-2.0502.9295.14.14.ari      25) altd/2.0

  8) cray-libsci/16.07.1                   17) rca/1.0.0-2.0502.57212.2.56.ari       26) craype-hugepages8M

  9) udreg/2.3.2-1.0502.9889.2.20.ari      18) atp/2.0.2

On Sun, Jul 31, 2016 at 2:17 AM, Steve Petruzza <spetruzza AT sci.utah.edu> wrote:

Hi all,

I’m trying to build on an XC40 charm++ 6.7.1 using: 

./build charm++ gni-crayxc smp -j16  --with-production

but at some point I get the following error:

../bin/charmc  -optimize -production   -I.   -c -o ckdll.o ckdll.C
../bin/charmc  -optimize -production   -I.   -c -o ckhashtable.o ckhashtable.C
../bin/charmc  -optimize -production   -I.   -c -o sockRoutines.o sockRoutines.c
../bin/charmc  -optimize -production   -I.   -c -o conv-lists.o conv-lists.C
../bin/charmc  -optimize -production   -I.   -c -o RTH.o RTH.C
../bin/charmc  -optimize -production   -I.   -c -o persist-comm.o persist-comm.c
../bin/charmc  -optimize -production   -I.   -c -o mempool.o mempool.c
../bin/charmc  -optimize -production   -I.   -c -o graph.o graph.c
../bin/charmc  -optimize -production   -I.   -c -o TopoManager.o TopoManager.C
../bin/charmc  -optimize -production   -I.   -c -o CrayNid.o CrayNid.c
../bin/charmc  -optimize -production   -I.   -c -o BGQTorus.o BGQTorus.C
../bin/charmc  -optimize -production   -I.   -c -o partitioning_strategies.o partitioning_strategies.C
../bin/charmc  -optimize -production   -c pup_f.f90 && ../bin/charmc  -optimize -production   -cpmod ../include pupmod.M || touch pup_f.o
../bin/charmc  -optimize -production   -o ../lib/libldb-rand.a cldb.rand.c
../bin/charmc  -optimize -production   -o ../lib/libldb-spray.a cldb.spray.c
CrayNid.c: In function 'getXTNodeID':
CrayNid.c:32:5: error: #error "Cannot get network topology information on a Cray build. Swap current module xt-mpt with xt-mpt/5.0.0 or higher and xt-asyncpe with xt-asyncpe/4.0 or higher and then rebuild"
    #error "Cannot get network topology information on a Cray build. Swap current module xt-mpt with xt-mpt/5.0.0 or higher and xt-asyncpe with xt-asyncpe/4.0 or higher and then rebuild"
     ^
Fatal Error by charmc in directory /home/petruzsn/charm/gni-crayxc-smp/tmp
   Command cc -I/opt/cray/rca/1.0.0-2.0502.60530.1.62.ari/include -I/opt/cray/alps/5.2.4-2.0502.9774.31.11.ari/include -I/opt/cray/gni-headers/4.0-1.0502.10859.7.8.ari/include -I/opt/cray/pmi/5.0.10-1.0000.11050.0.0.ari/include -I/opt/cray/ugni/6.0-1.0502.10863.8.29.ari/include -I/opt/cray/wlm_detect/1.0-1.0502.64649.2.1.ari/include -I/opt/cray/krca/1.0.0-2.0502.63139.4.31.ari/include -I/opt/cray-hss-devel/7.2.0/include -I/opt/cray/gni-headers/4.0-1.0502.10859.7.8.ari/include -I/opt/cray/ugni/6.0-1.0502.10863.8.29.ari/include -D_REENTRANT -D_REENTRANT -D_REENTRANT -D_REENTRANT -I../bin/../include -D__CHARMC__=1 -I. -O2 -U_FORTIFY_SOURCE -c CrayNid.c -o CrayNid.o returned error code 1
charmc exiting...
gmake: *** [CrayNid.o] Error 1
gmake: *** Waiting for unfinished jobs….

My module list is this:

  1) modules/3.2.10.3                       8) slurm/slurm(default)                  15) pmi/5.0.10-1.0000.11050.0.0.ari       22) atp/1.8.3
  2) switch/1.0-1.0502.60522.1.61.ari       9) eswrap/1.3.2-1.020200.1274.0          16) dmapp/7.0.1-1.0502.11080.8.76.ari     23) PrgEnv-gnu/5.2.82
  3) gcc/5.1.0                             10) ksl/ksl                               17) gni-headers/4.0-1.0502.10859.7.8.ari  24) cmake/3.1.3
  4) craype-network-aries                  11) darshan/2.3.1                         18) xpmem/0.1-2.0502.64982.5.3.ari        25) craype-hugepages8M
  5) craype-haswell                        12) cray-libsci/13.2.0                    19) dvs/2.5_0.9.0-1.0502.2188.1.116.ari
  6) craype/2.4.2                          13) udreg/2.3.2-1.0502.10518.2.17.ari     20) alps/5.2.4-2.0502.9774.31.11.ari
  7) cray-mpich/7.2.6                      14) ugni/6.0-1.0502.10863.8.29.ari        21) rca/1.0.0-2.0502.60530.1.62.ari

I could not find the modules mentioned in the error. What am I missing?

Thank you,

Steve

--

Jeff Hammond
jeff.science AT gmail.com
http://jeffhammond.github.io/